Here you will know how you can flash Samsung Stock Firmware Files using Odin Downloader application on your windows running computer.
Main Requirements: First of all you should have Windows computer and Samsung Device in order to follow below mentioned procedure.
How to Flash Samsung Stock Firmware (4 Files)
Step No. 1 – First you need to check that Samsung USB Driver is installed on your computer or not. If it is already installed then you can skip this Step No. otherwise you need to download & Install Samsung USB Driver on your computer.
Step No. 2 – Now you need Odin Downloader, If it is already available then you can skip this Step otherwise you need to Download & Extract Odin Downloader on your computer.
Step No. 3 – Now you need to download & extract Samsung Stock Firmware (4 files) on your computer. Once you extract the firmware you will be able to see file same like below. (File name can vary as per device model).
Step No. 4 – Now switch off (Power Off) your Samsung Device.
Step No. 5 – Now you have to boot your Samsung Device into Download mode. To boot into download mode: Press & Hold Power + Home + Volume Down Key at same time for 8 seconds.
Step No. 6 – Once you have completed booting in download mode now you will see the Warning Triangle on your device screen. Now you have to press the Volume UP key to continue.
Step No. 7 – Now Open Odin Downloader which is already available on your computer (Confirm in Step No. 2).
Step No. 8 – Once Odin downloader is launched then you need to connect to your Samsung device to computer using the USB cable.
Step No. 9 – Once your device is connected then Odin will automatically detect it and you will be able to see Added message in Odin Log area.
Step No. 10 – Now click on BL button and select the BL file from your firmware folder.
Step No. 11 – Now you need to click on AP Button and select AP file from your firmware folder.
Step No. 12 – Now you need to click on CP button and select CP file from your firmware folder.
Step No. 13 – Now you need to click on CSC button and select CSC file from your firmware folder.
Step No. 14 – Now you have to click on Start button to begin the flashing process. This process may take more than 5 minutes to complete.
Step No. 15 – Once this Flashing process is complete, you will be able to see the Green Pass Message in Odin. Now you have to disconnect your device from your computer.
Step No. 16 – Now you need to restart your device. (If your device is already restarted then ignore this step)
If you are looking to download original Stock Firmware you can visit us anytime. The Stock Firmware File shared by this page is formally released by company and helps you to recover your mobile device if you ever got bootloop, software error, update error, hanging and dead issue.